The Original Japanese Screw Punch. The brass chuck holds one of the 7 drill bits supplied with the Punch. Pressure exerted downwards, causes the bit to spin, drilling through paper and board without 'snagging'. Excellent for drilling through paper, leather, board, etc.
The drill and bits can be purchased as:
- Drill with 7 bits - 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm.
- Drill with 3.0mm bit only
Spare Bits are also available individually as:
- 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.0mm
- in sets of 7 bits (1 of each size 1.0mm - 4.0mm).
Prices below are subject to VAT
| Item# |
Item Name |
Our Price |
Qty |
Add |
| TL-190-000 |
Japanese Drill Punch (incl. set of 7 bits) |
|
|
|
| TL-190-001 |
Japanese Drill Punch with 3.0mm bit only |
|
|
|
| TL-190-10 |
Japanese Drill Punch, Spare Bit - 1.0mm |
|
|
|
| TL-190-15 |
Japanese Drill Punch, Spare Bit - 1.5mm |
|
|
|
| TL-190-20 |
Japanese Drill Punch, Spare Bit - 2.0mm |
|
|
|
| TL-190-25 |
Japanese Drill Punch, Spare Bit - 2.5mm |
|
|
|
| TL-190-30 |
Japanese Drill Punch, Spare Bit - 3.0mm |
|
|
|
| TL-190-35 |
Japanese Drill Punch, Spare Bit - 3.5mm |
|
|
|
| TL-190-40 |
Japanese Drill Punch, Spare Bit - 4.0mm |
|
|
|
| TL-190-45 |
Japanese Drill Punch, Spare Bit - 4.5mm |
|
|
|
| TL-190-50 |
Japanese Drill Punch, Spare Bit - 5.0mm |
|
|
|
| TL-190-BIT |
Japanese Drill Punch, Spare Bits - set of 7 (1.0mm - 4.0mm) |
|
|
|
| Tick (check) the items you wish to purchase, then click
|
|
Can't fault the product or service 
